Does your AC or heat pump still use R-22? Here's what it means for your home

If your air conditioner or heat pump was installed before 2010, there's a good chance it runs on a refrigerant called R-22, often known by the brand name Freon. R-22 hasn't been produced or imported in the United States since January 1, 2020.

That doesn't mean your system has to come out tomorrow. It does mean repairs are getting harder and more expensive, and it's worth knowing where you stand before something breaks. Here's a plain-language look at what changed, what it means for service, and how to plan your next step.

What happened to R-22?

R-22 is an older refrigerant that harms the ozone layer, so the EPA phased it out over more than a decade ago. New air conditioners and heat pumps stopped being built for R-22 around 2010. On January 1, 2020, production and import of R-22 itself ended.

Since then, the only R-22 available for repairs is refrigerant that was already made, plus R-22 recovered from old systems and cleaned for reuse. That supply only gets smaller over time.

It's still legal to own and run an R-22 system. The EPA does not require you to replace it.

How to tell if your system uses R-22

  • Check the label on your outdoor unit. If the refrigerant is listed as "R-22" or "HCFC-22," your system uses R-22.

  • Look at the install date. Most systems built in 2009 or earlier use R-22.

  • Still not sure? Our technicians can confirm it during any service visit or maintenance tune-up.

Why R-22 systems are getting harder to service

Refrigerant is limited and costly. Every pound of R-22 comes from a shrinking supply. Recharging a system costs more than it used to, and prices can shift quickly.

Low refrigerant means a leak. Refrigerant isn't used up like fuel. If a system is low, it's leaking, and adding more R-22 without fixing the leak only buys time. You pay for refrigerant again each time it leaks out.

Parts are harder to find. Most R-22 systems are now at least 15 years old. Matching compressors, coils, and other parts aren't always available. When they are, putting major new parts on an aging system is a risky investment.

You can't just switch refrigerants. R-22 equipment was designed around R-22. Newer refrigerants run at different pressures and use different oils, so they can't simply be added to an older system. There's no true "drop-in" replacement for R-22. Conversions usually involve oil changes and other component work, and they can reduce performance.

Old and new equipment don't mix well. In a split system, the outdoor unit and indoor coil are designed as a matched set. A newer outdoor unit generally needs a matching indoor coil, so a "just replace the outside unit" fix on an R-22 system usually turns into a bigger job.

A safety warning about "R-22a"

You may see products sold online as "R-22a" or "22a." Despite the name, they are not R-22. They're propane-based and highly flammable, and the EPA has warned that using them in home air conditioners can lead to fire or explosion. Using the wrong refrigerant can also void your manufacturer's warranty.

If anyone offers to recharge your system with a "22a" product, say no. Refrigerant work should always be done by an EPA-certified technician.

What this means for Willamette Valley homes

Many homes in our area rely on a heat pump for both heating and cooling. That means an R-22 heat pump isn't just your summer AC. It's often your main source of heat in winter.

A refrigerant leak or compressor problem in January can leave you on backup heat, or without heat, while you weigh a big decision. Planning ahead on your own timeline beats making a rushed choice during the coldest week of the year.

Should you repair or replace an R-22 system?

Not every R-22 system needs to be replaced right away. If yours runs well, isn't leaking, and gets regular maintenance, it may have useful life left. Keep up with tune-ups so small issues stay small.

Trane puts the average lifespan of an air conditioner or heat pump at about 15 years, so most R-22 systems are already past that mark. Replacement usually makes more sense when:

  • The system has a refrigerant leak, especially a repeat leak

  • The compressor or outdoor coil has failed

  • A repair would cost a large share of the price of a new system

  • Energy bills are climbing or some rooms never feel comfortable

  • You'd rather plan the project than face an emergency replacement

What you gain with a newer system

Today's heat pumps and air conditioners use refrigerants that don't harm the ozone layer, such as R-454B. They're also typically more efficient than systems from 15 or more years ago, which can mean steadier comfort and lower energy use.

When we plan a heat pump replacement or air conditioning replacement, we evaluate first. We calculate what your home actually needs and check whether your ductwork can move the right amount of air. That way your new system is properly sized for your home, not just swapped like-for-like.

How Hendrix can help

If your system uses R-22, we'll give you a straight answer: what's going on, what a repair would involve, and whether replacement makes more sense for your home. No pressure, just clear options.

Hendrix Heating & Air Conditioning has been locally owned since 1952. Our work is done by our own employees, not subcontractors, and we've earned thousands of 5-star reviews across Google and Nearby Now.

Ready to find out where your system stands? Talk with our team to schedule a visit.

Frequently asked questions about R-22

Is R-22 illegal?

No. It's legal to own and run an R-22 system, and technicians can still service it with existing or reclaimed R-22. What ended on January 1, 2020, was new production and import of R-22 in the United States.

Do I have to replace my R-22 system?

No. The EPA does not require it. If your system is running well, you can keep using it. Most homeowners plan a replacement when the system needs a major repair or reaches the end of its expected life.

Can my R-22 system be converted to a different refrigerant?

There's no true drop-in replacement for R-22. Some approved refrigerants can be used for conversions, but they usually require oil changes and other component work, and they can reduce performance. For an older system, replacement is often the better long-term value.

How much does it cost to recharge an R-22 system?

It depends on how much refrigerant is needed and current supply prices, which have risen as supplies shrink. A system that's low on refrigerant has a leak, so adding R-22 without repairing the leak is only a short-term fix. We'll walk you through your options before any work begins.

How do I know if my system uses R-22?

Check the label on your outdoor unit. If it lists "R-22" or "HCFC-22" as the refrigerant, your system uses R-22. Systems built in 2009 or earlier usually do. Our technicians can also confirm it during a service visit.

Is my newer R-410A system affected?

Not by the R-22 phase-out. R-410A systems can still be serviced and repaired. New systems now use lower-impact refrigerants such as R-454B, but existing R-410A systems can keep running and be serviced.

Previous
Previous

Cold weather tips: protecting your heat pump, furnace, and family this winter

Next
Next

What's actually included in a $49 HVAC tune-up